Convert cassettes to mp3 mac

This type of converter, which looks like a portable tape player with a USB cable for connecting to the computer, is usually sufficient for transferring spoken-word audio and other standard recordings. Even if your Mac laptop did not come with a CD player to install the software, though, there are ways to make some USB-to-MP3 cassette converters work. If you cannot buy or borrow an external USB disc drive to use with the laptop, check the system requirements on the tape converter. Some models can work with the free Audacity audio-editing program that you can download right to your Mac from the Internet, which lets you skip the installation from a disc.

Most Macs already come with the free GarageBand recording software that can also be used to import audio played through a device connected to the USB port. Once you record a tape in GarageBand or Audacity , you can use the program to clean up some of the noise and hiss from the tape and then save the file as a MP3 track.

How to Record Cassette Tapes into a Computer

Clearing Files on an Android Tablet. The EZTC2 software allows Windows users to convert their tapes quickly, and also includes Gracenote MusicID technology to automatically retrieve album, artist, and song information. The software also lets you enter track information. Both can be used for playback, and Deck B may also be used for recording, great for dubbing tapes, or recording external sources to tape. The front-panel display shows audio meters and lets you know the record and dubbing status.

A tape counter is also provided.

Testing Two Cassette Tape to USB MP3 Converter/ Capture Devices (ezcap231 & Reliance)

I have about tapes that i need to convert to MP3. What is the most effecient way to do this? Hi I have some tapes that were recorded on a Tascam 4-track recorder. I bought the ION tape to pc usb conversion sysytem with dual dubbing cassette decks. I am trying to convert the recorded tapes from the Tascam 4-track recorder to regular tape cassette but it is not doing it. It sounds just like the 4-track recording and is not converting. Any help would be greatly appreciated.

It cannot decode a 4 track recording.

You are here

Mark S wrote: Please send us an e-mail regarding the hardware you are using: Can this be used with the small micro tape cassetes? I have some serious work to take from the micro cassette; so that I may type out what's recorded. Is this possible. There is no setup or special drivers needed.

The stereo headphone output with dedicated level control allows for monitoring both input and output. The U-CONTROL download area at Behringer's website offers a huge software package for recording and editing making the interface a complete audio solution, which provides a connection between the analog and digital domain.

Ultra-flexible audio interface connects instruments, mixer etc.

Site Index

Stereo headphone output with dedicated level control allows for monitoring both input and output. Here's my problem. I have a wizard little Sony recodable MD. I'd like to get the contents of the recorded MD's into Wavfepad on my laptop. I have a piece of hardware labled Digital PC Link. Somehow the cables are just not facilitating any signal transfer. What do I need to make it work? Thanks for the input.

3 Apps to Convert Cassette Tape to MP3 | Leawo Tutorial Center

I smile a bit 'cause I could swear from your advice that your a vested sales representative for Behringer. BUT thats ok becausde I know, have used, and respect the name and its products I have been exposed to over time. I borrowed a cassette player from my neighbor and it has a headset jack as does my computer. Bought a male to male cable and plugged in both.

Sounded fine. Then I downloaded Audacity to my computer. I began testing to see if I was recording anything on my computer because I saw no sound info on my audacity screen. I am recording nothing and cannot figure out what my problem is.

  • Converting audio tapes to digital files | Macworld;
  • star wars the force unleashed 2 mac port!
  • adobe indesign mac vs pc.
  • albino synth free download mac!
  • mac word 2008 table of contents hyperlink.

Please help. I assume you are connecting the cassette player into the microphone jack of the computer. You will need a device to digitize the analog recordings before they get to the computer. Here is the device you need:. The device shows 2 inputs for cables, but I do not have anything like that.

Will a single male to lame cable work? Its gold-plated connectors protect against corrosion while ensuring clear signal paths for your audio.

Converting audio tapes to digital files

Sorry to say, but I am back again and obviously out of my league with this. I have 4 audio tapes I want to convert to a digital format on my computer. I have a cassette player and have inserted a tape. I have Y-cable you recommended plugged into the headphone jack on the player. These tapes are recordings of 2 of my children from 40 years ago. I would like to be able to eventually burn them a disk with these recordings. The Y-cable is plugged into the "input" of the UCA which you also recommended which in turn is plugged into my laptop.

I have plugged headphones into the UCA and I can hear the recording when I press "play" on the audio cassette player. I have the volume turned up to max on the UCA. While everything may seem to be fine, I cannot tell where, if anywhere, the recoding is going on my computer. That takes care of your hardware hookup. Load the first cassette of the set into the tape deck and start it playing. When side one is finished, stop the recording and save it with a name that helps you keep the various recordings in the proper sequence— MyBookTape1Pt1 , for example.

Flip the tape over and do it all over again. Repeat for each tape in the set. You can import them into iTunes, build a playlist around them, and then sync them to your device. Or, as I described when talking about ripping audiobook CDs, you can use Join Together or Audiobook Builder to combine the files into a single track.